ANODES - BACKFILL

  • CONDUCTIVE GROUNDING CEMENT 50lb (22.7kg) BAG LORESCO POWERSET

    • Positive low resistance, electrical connection to the earth.
    • Compatible with all copper grounding systems.
    • Does not contain any hazardous chemicals.
    • Will attain a hardened state.
    • Will not leech into the ground or wash away.
    • Never needs recharging.
    • Electrically conductive.
    • Environmentally friendly.
    • Stable permanent ground for the life of the grounding system.
    • Contains a corrosion inhibitor to protect copper.
    • Will not expand or experience any shrinkage.
    • Not affected by freezing.
    • Simple to install.
    • Excellent shelf life with no performance effects.

    Horizontal or Grid Construction:
    Entire grounding system should be surrounded by PowerSetTM. Conductors should be insulated as they exit the PowerSetTM column. PowerSetTM should be used as a ground enhancement material when a setting fill is specified.

    Horizontal Construction:

    • Pour into horizontal trench until level of ground wire is reached.
    • Place ground wire. Pour in additional PowerSetTM until ground wire is covered to desired height.
    • Cover with fill. No tamping is necessary.
    • Remove excess water prior to application.

    Grid Construction:

    • Pour PowerSetTM and spread over ground until desired thickness is achieved.
    • Cover with fill.
    • Use ground staples to maintain ground wire in center of fill.

    The use of PowerSetTM around the grounding system will reduce surge impedance by increasing the effective contact area of the electrode to the soil.

    Code: 11397
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • CONDUCTIVE GROUNDING CEMENT LOW RESISTIVITY 50lb (22.7kg) BAGS LORESCO POWERFILL

    • Positive low resistance, electrical connection to the earth.
    • Compatible with all copper grounding systems.
    • Does not contain any hazardous chemicals.
    • Will not leech into the ground.
    • Never needs recharging.
    • Electrically conductive.
    • Environmentally friendly.
    • Stable permanent ground for the life of the grounding system.
    • Contains a corrosion inhibitor to protect copper.
    • Will not expand or experience any shrinkage.
    • Not affected by freezing.
    • Simple to install.
    • Excellent shelf life with no performance effects.

    Horizontal or Grid Construction
    Entire grounding system should be surrounded by PowerFillTM. Conductors should be insulated as they exit the PowerFillTM column.

    Horizontal Construction:

    • Pour into horizontal trench until level of ground wire is reached.
    • Place ground wire.
    • Pour in additional PowerFillTM until ground wire is covered to desired height.
    • Cover with fill. No tamping necessary.

    Grid Construction:

    • Pour PowerFillTM and spread over ground grid until desired thickness is achieved.
    • Cover with fill.

    The use of PowerFillTM around the grounding system will reduce surge impedance by increasing the effective contact area of the electrode to soil.

    Code: 11399
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • COKE PETROLEUM CALCINED DW-1 LORESCO - 50 LB BAG (74#cuft) IMPRESSED CURRENT BACKFILL

    • Loresco DW-1® may be poured freely into dry applications. Tamping is not required. When it is applied by pumping, the recommended method is to pump from the bottom of the bored hole upward. After the application pipe (a one-inch steel pipe) is lowered down to the bottom of the bored hole, it is coupled to a 20 GPM pump with a minimum capacity of 250 psi. Normally, the application pipe does not have to be raised during pumping procedures.

    Horizontal Installation Procedure:

    • Have a reasonably clean ditch (design usually calls for a ditch one foot wide).
    • Pour Loresco DW-1® in a continuous layer six inches deep (or as specified).
    • Place anodes on top of DW-1®.
    • Pour DW-1® in a continuous layer six inches deep until anodes are covered by a six inch backfill cover (or as specified).
    • Fill the remainder of the ditch as specified.

    Vertical Installation Procedure

    • Have a reasonably clean hole (depth depending on soil resistivity).
    • Place one foot of DW-1® in bottom of hole.
    • Lower and center anode in proper position.
    • Pour DW-1® over anode until design level is reached.
    • Fill remainder of hole as design specifies.

    Specifications:

    • Bulk density: 74 lbs. per cubic foot.
    • Particle sizing ranging from 0.1 to 1 mm.

    Shipping Data:

    • Loresco DW-1® is shipped in fifty (50) pound (22.7 kg) coated, woven polypropylene bags. DW-1® may be stored outside for limited periods (not to exceed four hundred hours of sunlight). Pallets are available with fifty bags per pallet. Proven export packaging is also available.

     

    Code: DW150B
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE CAST IRON HIGH SILICON STICK TYPE EHA, #8/7 STR HMWPE BLACK 2M

    • One alloy into one product: Anodes, exclusively for nearly 20 years...throughout the world.

    • Trained, stable, and dedicated to continuous improvement

    • Higher Impact Strength in Larger Sizes

    • Improved Cable Connection and Seal

    • For anodes, Anotec's High Silicon Iron has few limitations compared to other materials, and Anotec excels in delivering the best there is for impressed current cathodic protection.

    Code: EHA28H
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE CAST IRON HIGH SILICON STICK TYPE EHA, #8/7 STR HMWPE BLACK 30m

    • One alloy into one product: Anodes, exclusively for nearly 20 years...throughout the world.

    • Trained, stable, and dedicated to continuous improvement

    • Higher Impact Strength in Larger Sizes

    • Improved Cable Connection and Seal

    • For anodes, Anotec's High Silicon Iron has few limitations compared to other materials, and Anotec excels in delivering the best there is for impressed current cathodic protection.

    Code: EHA308H
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE CAST IRON HIGH SILICON TUBULAR 2242Z #8/7 STR RWU90 RED 3m PKGD 5"x53" CBD 65 LBS

    Code: P2242553D
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • COKE PETROLEUM CALCINED SC-3 LORESCO - 50 LB BAG (74#/cuft) IMPRESSED CURRENT BACKFILL

    Loresco SC-3®, due to its dust-free manufacture, is simple to install by either mixing and pumping or by pouring. With deep anode systems, pumping from the bottom up is recommended. Loresco SC-3® has superb pumping qualities due to the addition of surfactants and when agitated in water, takes on the characteristics of heavy mud. A recommended mix is seven gallons of water per one hundred pounds. After installing SC-3®, allow twenty-four hours settling time before energizing. The modified surface of the carbon particles coupled with the action of the surfactants in SC-3® will achieve positive electrical contact by settling. Vibrating or compacting is not necessary.

    Material Description:

    Loresco SC-3® is a surface modified, blended, and sized carbon backfill with surfactants.

    Specifications:

    • Bulk Density: 74 lbs. per cubic foot
    • Predominantly round particles
    • All particles surface modified for maximum electrical conductivity
    • Particle Sizing: To be dust free with a maximum particle size of 1 mm
    • Minimum calcination temperature of base materials is 1250° C
    • Base materials are calcined under ISO 9002 quality control
    • Surfactants are added to assist pumping and settling
    • No de-dusting oils are used during the manufacture of base particles

    Shipping Data:

    Loresco SC-3® is shipped in fifty (50) pound (22.7 kg) coated, woven polypropylene bags. SC-3® may be stored outside for limited periods (not to exceed four hundred hours of sunlight). Pallets are available with fifty bags per pallet. Proven export packaging is also available.

    Code: SC350B
    QUICK SHIP AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • COKE PETROLEUM CALCINED SWK LORESCO 50 LB BAG (70#/cuft) IMPRESSED CURRENT BACKFILL

    Loresco SWK® may be poured freely in dry applications. Tamping is not required. if SWK® is poured through water or light mud, the rate of pouring should not exceed the rate of SWK®'s wetting and sinking. The rate of pouring through water will be approximately one hundred pounds per two minutes.

    Horizontal Installation Procedure:

    • Have a reasonably clean ditch (design usually calls for a ditch one foot wide).
    • Pour Loresco SWK® in a continuous layer six inches deep (or as specified).
    • Place anodes on top of SWK®.
    • Pour SWK® in a continuous layer until anodes are covered by a six inch backfill cover (or as specified).
    • Fill the remainder of the ditch as specified.

    Vertical Installation Procedure:

    • Have a reasonably clean hole (depth depending on soil resistivity).
    • Place one foot of SWK® in bottom of hole.
    • Lower and center anode in proper position.
    • Pour SWK® over anode until design level is reached.
    • Fill remainder of hole as design specifies.

    Specifications:

    • Bulk Density: 70 lbs. per cubic foot.

    • Particle Sizing: Ranging from 0.1 to 12mm.

    Shipping Data:

    Loresco SWK® is shipped in fifty (50) pound (22.7 kg) coated, woven polypropylene bags. SWK® may be stored outside for limited periods (not to exceed four hundred hours of sunlight). Pallets are available with fifty bags per pallet. Proven export packaging is also available.

    Code: SWK50B
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE ZINC RIBBON PLATTLINE II "SUPER" PLATTLINR II 1" X 1-1/4" 2.4#/FT

    Plattline can be used to cathodicall protect pipeline, above ground storage tanks or other steel structures subject to corrosion.

    Zinc ribbon anodes provide a very simple, cost effective, maintenance-free method of corrosion control for buried or immersed metals such as iron, steel, Aluminum, copper, etc. It is especially useful for unattended applications; those where other Cathodic protection systems requiring monitoring and/or frequent maintenance cannot be possible.

    Platttline is an effective product for installation for grounding matts, intrench grouding for pipelines and other application that require installation of additional grounding to reduce induce AC. 

    Code: ZR1114M
    QUICK SHIP AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE ZINC RIBBON PLATTLINE "SMALL SIZE" 11/32" x 13/32" 0.25LB/FT

    Plattline can be used to cathodicall protect pipeline, above ground storage tanks or other steel structures subject to corrosion.

    Zinc ribbon anodes provide a very simple, cost effective, maintenance-free method of corrosion control for buried or immersed metals such as iron, steel, Aluminum, copper, etc. It is especially useful for unattended applications; those where other Cathodic protection systems requiring monitoring and/or frequent maintenance cannot be possible.

    Platttline is an effective product for installation for grounding matts, intrench grouding for pipelines and other application that require installation of additional grounding to reduce induce AC. 

    Code: ZR11321332
    AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE ZINC RIBBON PLATTLINE "PLUS SIZE" 5/8" x 7/8" 1.2#/FT

    Plattline can be used to cathodicall protect pipeline, above ground storage tanks or other steel structures subject to corrosion.

    Zinc ribbon anodes provide a very simple, cost effective, maintenance-free method of corrosion control for buried or immersed metals such as iron, steel, Aluminum, copper, etc. It is especially useful for unattended applications; those where other Cathodic protection systems requiring monitoring and/or frequent maintenance cannot be possible.

    Platttline is an effective product for installation for grounding matts, intrench grouding for pipelines and other application that require installation of additional grounding to reduce induce AC. 

    Code: ZR5878S
    QUICK SHIP AVAILABLE
    Quebec Online Orders Not Available
    More Info
  • ANODE ZINC RIBBON PLATTLINE "STANDARD SIZE" PLATTLINR II 1/2” x 9/16” 0.6#/FT

    Plattline can be used to cathodicall protect pipeline, above ground storage tanks or other steel structures subject to corrosion.

    Zinc ribbon anodes provide a very simple, cost effective, maintenance-free method of corrosion control for buried or immersed metals such as iron, steel, Aluminum, copper, etc. It is especially useful for unattended applications; those where other Cathodic protection systems requiring monitoring and/or frequent maintenance cannot be possible.

    Platttline is an effective product for installation for grounding matts, intrench grouding for pipelines and other application that require installation of additional grounding to reduce induce AC. 

    Code: ZRJR
    QUICK SHIP AVAILABLE
    Quebec Online Orders Not Available
    More Info