COATINGS - TAPES - EPOXY

Straight mixing tip for the Protal Air Cartridge Gun (1000 ml)v for Protal 7200 and 7900HT to provide uniform mixing of the Part A & B epoxies.

• Cold temperature application down to -4°F (-18°C)
• Will not freeze when applied to substrates below 32°F (0°C)
• Fast cure, fast initial set
• Will cure when submersed in water
• High build (in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Does not shield cathodic protection
• Static Mixing Tips available

• Cold temperature application down to -4°F (-20°C)
• Will not freeze when applied to substrates below 32°F (0°C)
• Fast cure, fast initial set
• Will cure when submersed in water after application
• High build (up to 50 mils / 1270 microns in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Does not shield cathodic protection
• Repair cartridges available (50 ml and 825 ml)

• Fast touch dry and set times
• High temperature resistance up to 203°F (95°C)
• High build (up to 70 mils / 1778 microns in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Safe and environmentally friendly
• Does not shield cathodic protection
• Can be applied with brush, roller or spray
• Available in a variety of packaging options
• Meets AWWA C-210-92 Standard
• Outstanding self-leveling characteristics
• CSA Z245.30 compliant

• 100% solids
• Provides corrosion protection
• Resists wave action
• Designed for underwater and other wet applications
• Can be applied up to 2" (50 mm) in thickness
• Self-priming on most surfaces and over most generic coatings
• Underwater rapid cure characteristics
• VOC free

• Single component
• High build
• Can be applied with brush or roller
• Self-Priming
• VOC compliant
• Will not freeze
• Flexible and will not crack

• Excellent sealing properties
• No VOCs
• Will adhere to metal, PVC, polyethylene and concrete
• Not effected by water, acids and salts
• Easy application
• Inert and environmentally stable
• Minimal surface preparation (SSPC SP 2-3)
• Meets AWWA C217 Standard.
• CSA Z245.30 component

• Excellent sealing properties
• No VOCs
• Will adhere to metal, PVC, polyethylene and concrete
• Not effected by water, acids and salts
• Easy application
• Inert and environmentally stable
• Minimal surface preparation (SSPC SP 2-3)
• Meets AWWA C217 Standard.
• CSA Z245.30 component

KEMA Module Sealants are safe, easy-to-use, long lasting, corrosion-resistant, barrier coatings. They are offered as either sealants or tapes in a variety of roll lengths, widths and thicknesses. The tapes are completed with a polyethylene (PE) film bonded to one side. The PE film is currently available in 5 mils.(127ums) or 12 mils.(304.8ums ) film thicknesses. KEMA Module Sealants are at work in the ice and snow of the Canadian North; the dry deserts of the Middle East and in the moist, humid coastal regions of Africa.

Safe, easy-to-use, long lasting, corrosion-resistant, barrier coatings. They are offered as either sealants or tapes in a variety of roll lengths, widths and thicknesses. The tapes are completed with a polyethylene (PE) film bonded to one side. The PE film is currently available in 5 mils.(127ums) or 12 mils.(304.8ums ) film thicknesses. KEMA Module Sealants are at work in the ice and snow of the Canadian North; the dry deserts of the Middle East and in the moist, humid coastal regions of Africa.