Trenton - Tapes & Patches

• Easy to apply, simply remove the wrapper and press on, no tools required
• Strong polymer backing for durable corrosion protection
• Minimal surface preparation (dry, NACE SP2) No primer required
• Moldable coating easily conforms to a variety of profiles – can conform to multi lead connections
• Compatible with most pipe coatings
• Conforms to multiple profiles
• No curing, Immediate backfill
• No primer required

Application Procedures

1. Surface should be clean and dry at the time of application
2. Apply adhesive/sticky face of Trenton Patch-Pad to the surface to be covered and press to conform.
3. Ensure that the edges of the Patch-Pad are in contact with the metal surface.

Trenton Patch-Pad is available in a variety of sizes:

• 4” x 4” pads; 12 pads/case
• 5” x 10” pads; 6 pads/case
• 6” x 6” pads; 6 pads/case

• Easy to apply, simply remove the wrapper and press on, no tools required
• Strong polymer backing for durable corrosion protection
• Minimal surface preparation (dry, NACE SP2) No primer required
• Moldable coating easily conforms to a variety of profiles – can conform to multi lead connections
• Compatible with most pipe coatings
• Conforms to multiple profiles
• No curing, Immediate backfill
• No primer required

Application Procedures

1. Surface should be clean and dry at the time of application
2. Apply adhesive/sticky face of Trenton Patch-Pad to the surface to be covered and press to conform.
3. Ensure that the edges of the Patch-Pad are in contact with the metal surface.

Trenton Patch-Pad is available in a variety of sizes:

• 4” x 4” pads; 12 pads/case
• 5” x 10” pads; 6 pads/case
• 6” x 6” pads; 6 pads/case

• Easy to apply, simply remove the wrapper and press on, no tools required
• Strong polymer backing for durable corrosion protection
• Minimal surface preparation (dry, NACE SP2) No primer required
• Moldable coating easily conforms to a variety of profiles – can conform to multi lead connections
• Compatible with most pipe coatings
• Conforms to multiple profiles
• No curing, Immediate backfill
• No primer required

Application Procedures

1. Surface should be clean and dry at the time of application
2. Apply adhesive/sticky face of Trenton Patch-Pad to the surface to be covered and press to conform.
3. Ensure that the edges of the Patch-Pad are in contact with the metal surface.

Trenton Patch-Pad is available in a variety of sizes:

• 4” x 4” pads; 12 pads/case
• 5” x 10” pads; 6 pads/case
• 6” x 6” pads; 6 pads/case

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Ideal where only minimal surface preparation is possible
• Readily conforms to irregularly shaped surfaces
• Can be applied over wet surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• No drying or curing time before backfilling
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)

• Quick and easy to apply, with minimal equipment requirements
• Readily conforms to irregularly shaped surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• Can be applied over wet surfaces at “in-service” temperatures
• No cure time, so ready for immediate backfill after application
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)
• May be used aboveground or belowground (UV resistant)
• Resistant to acid, salts, and other soil organics over a wide range of pH
• High dielectric strength
•  Excellent resistance to cathodic disbondment
• Compatible with most other coatings
• Can be painted after firming up
• Cost effective, especially considering it does not require abrasion blasting and is much longer lasting than paint

• Quick and easy to apply, with minimal equipment requirements
• Readily conforms to irregularly shaped surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• Can be applied over wet surfaces at “in-service” temperatures
• No cure time, so ready for immediate backfill after application
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)
• May be used aboveground or belowground (UV resistant)
• Resistant to acid, salts, and other soil organics over a wide range of pH
• High dielectric strength
•  Excellent resistance to cathodic disbondment
• Compatible with most other coatings
• Can be painted after firming up
• Cost effective, especially considering it does not require abrasion blasting and is much longer lasting than paint

• Quick and easy to apply, with minimal equipment requirements
• Readily conforms to irregularly shaped surfaces
• Requires minimal surface preparation (SSPC SP2 or ISO St2)
• Can be applied over wet surfaces at “in-service” temperatures
• No cure time, so ready for immediate backfill after application
• Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)
• May be used aboveground or belowground (UV resistant)
• Resistant to acid, salts, and other soil organics over a wide range of pH
• High dielectric strength
•  Excellent resistance to cathodic disbondment
• Compatible with most other coatings
• Can be painted after firming up
• Cost effective, especially considering it does not require abrasion blasting and is much longer lasting than paint