# 2 WAX SPL COLOR 6” x 9' GREY FIRMS UP BUT DOES NOT BECOME HARD TRENTON 2xxx-WT06-09

AVAILABLE
Quebec Online Orders Not Available

Order by:

Trenton Wax-Tape® #2 anticorrosion wrap is unique in that it is soft and pliable then firms up to form a long-lasting, highly effective protective coating. The wrap is composed of microcrystalline waxes, plasticizers, corrosion inhibitors and other ingredients saturated into a nonwoven, nonstitch bonded synthetic fabric. There are no siliceous mineral fillers. Trenton Wax-Tape® Primer or Temcoat™ Primer is required prior to applying the Wax-Tape wrap. The primer acts as a surface conditioner by filling the pores of the metal, penetrating any rust and displacing any moisture. Trenton Fill-Pro™ profiling mastic can be used to fill in large voids. For further mechanical protection, Trenton MCO™ moisture-terwrap is available.

Typical Applications:

  • Aboveground pipe
  • Belowground pipe
  • Bridge spans
  • Irregular surfaces such as valves or fittings
  • Structural steelwork
  • Areas where blasting or painting may be impractical

  • Quick and easy to apply, with minimal equipment requirements
  • Readily conforms to irregularly shaped surfaces
  • Requires minimal surface preparation (SSPC SP2 or ISO St2)
  • Can be applied over wet surfaces at “in-service” temperatures
  • No cure time, so ready for immediate backfill after application
  • Non-toxic, non-carcinogenic, low Volatile Organic Components (VOCs)
  • May be used aboveground or belowground (UV resistant)
  • Resistant to acid, salts, and other soil organics over a wide range of pH
  • High dielectric strength
  •  Excellent resistance to cathodic disbondment
  • Compatible with most other coatings
  • Can be painted after firming up
  • Cost effective, especially considering it does not require abrasion blasting and is much longer lasting than paint

Product Data Sheet Download

Color: Brown, aluminum, white *
Thickness: 70 – 90 mil (1,8 – 2,3 mm)
Dielectric strength: 170 V/mil (6,7 kV/mm)
Application temp.: 0 – 110°F (-17 – 43 °C)
Operating temp.: -50 – 140°F (-45 – 60 °C)
Saturant pour point: 115 – 125°F (51.6 – 57.2 °C)

Packaging:

Wax-Tape® #2 anticorrosion wrap rolls are packed in cardboard cartons, approximately 35 lb (15.8 kg)/case.
2” x 9’ (5 cm x 2.7 m) rolls (48 rolls/case)
4” x 9’ (10 cm x 2.74 m) rolls (24 rolls/case)
6” x 9’ (15 cm x 2.7 m) rolls (16 rolls/case)
6” x 18’ (15 cm x 5.5 m) rolls (8 rolls/case)
9” x 18’ (23 cm x 5.5 m) rolls (6 rolls/case)
12” x 18’ (31 cm x 5.5 m) rolls (4 rolls/case)

This product has yet to be reviewed

To be the first to review this product simply fill out the form to the left and let us know how you feel about this product!


To estimate the freight on this item simply enter the destination postcode and the desired quantity and click the "estimate" button.