• Home
  • RGHD 4" PIPE - 87.5 SQFT 21"x50' - 30LB PER ROLL ROCKGUARD - RG220

RGHD 4" PIPE - 87.5 SQFT 21"x50' - 30LB PER ROLL ROCKGUARD - RG220

AVAILABLE
Quebec Online Orders Not Available

Order by:


ROCKGUARD® HD

This Pipeline Rockguard Protection Mesh is an 11 mm, three dimensional bi-planar extruded diamond structured mesh rock shield manufactured from polyethylene. 
Lightweight and ergonomically correct, ROCKGUARD® HD offers a consistent thickness throughout the width of each roll or pad to provide full protection to your pipeline during and after backfill operations.

 

RockGuard®HD is available in rolls and pads

• Rolls are utilized for pipeline diameters up to 24” with a width equal to the pipeline circumference plus a minimum 6” overlap

• Standard rolls are 50’ in length and do not exceed 105 pounds in weight. This ergonomically correct light weight is a safety benefit and minimizes the risk of injury at the jobsite

• Pads are utilized for pipelines with diameters greater than 24” with a width equal to the pipeline circumference plus a minimum 6” overlap

• Standard pad lengths are 72”

Interactive Product Catalog

 

• Does not interfere with cathodic protection - It has Holes to allow current flow. 

• Excellent impact and compressive strengths

• Initial protection during handling and backfill operations

• Long term protection from geologic movement, pipeline vibration and future excavation

• Consistent 11 mm thickness throughout the roll or pad to provide full protection

• Uniform open mesh with channels designed to resist wicking and prevent water storage next to the pipe

• Chemically inert and will not rot

• Effective in all climates

• Flexible for easy handling even in extremely low temperatures

• Ergonomically correct light weight minimizes risk of injury and allows for quick, efficient installation

• Custom sized rolls and pads for every pipeline diameter

Storage

  • Check the Rock Shield on arrival. 
  • Store Rock Shield underneath tarps to protect from oil, dirt, and sunlight.

 Installation Instructions

  • Rock Shield rolls or pads shall be affixed to pipe utilizing non-metallic bands of ¾” wide filament tape. 
  • Rock Shield shall completely encircle the pipe with a minimum overlap of 6 inches. 
  • Overlap shall be located at the bottom radius (6 o’clock position). 
  • Roll to roll and pad to pad overlap shall be a minimum of 2 inches. 
  • Back-fill should be “shaded” into the trench during back-fill procedure. Do not dump back-fill directly on protected pipe. 
  • Follow manufacturer’s recommendations.

PRODUCT DATA SHEET

PIPE SIZING CHART

Product Catalog

Installation Guide

MSDS DATA SHEET

 

This product has yet to be reviewed

To be the first to review this product simply fill out the form to the left and let us know how you feel about this product!

To estimate the freight on this item simply enter the destination postcode and the desired quantity and click the "estimate" button.