Search

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

• Compact, lightweight package
• Range of AC Fault Ratings
• Higher Blocking Voltage than Polarization Cells
• UL and C-UL Listed for Grounding Electrical Equipment
• UL, C-UL Listed for Class I, Division 2 Locations
• Certified by UL/DEMKO for Meeting ATEX Directive for Zone 2; CE Marked
• Certified by UL for IECEx Zone 2 locations
• Submersible Design

Loresco SWK® may be poured freely in dry applications. Tamping is not required. if SWK® is poured through water or light mud, the rate of pouring should not exceed the rate of SWK®'s wetting and sinking. The rate of pouring through water will be approximately one hundred pounds per two minutes.

Horizontal Installation Procedure:

• Have a reasonably clean ditch (design usually calls for a ditch one foot wide).
• Pour Loresco SWK® in a continuous layer six inches deep (or as specified).
• Place anodes on top of SWK®.
• Pour SWK® in a continuous layer until anodes are covered by a six inch backfill cover (or as specified).
• Fill the remainder of the ditch as specified.

Vertical Installation Procedure:

• Have a reasonably clean hole (depth depending on soil resistivity).
• Place one foot of SWK® in bottom of hole.
• Lower and center anode in proper position.
• Pour SWK® over anode until design level is reached.
• Fill remainder of hole as design specifies.

Specifications:

• Bulk Density: 70 lbs. per cubic foot.

• Particle Sizing: Ranging from 0.1 to 12mm.

Shipping Data:

Loresco SWK® is shipped in fifty (50) pound (22.7 kg) coated, woven polypropylene bags. SWK® may be stored outside for limited periods (not to exceed four hundred hours of sunlight). Pallets are available with fifty bags per pallet. Proven export packaging is also available.