TAPE/PASTE DENSO

Denso provides standard duty (SD) and heavy duty (HD) to meet your pipeline coating protection needs. Flexible 50 ft rolls or custom cut pads that can easily be installed without special training.

• Flexible for easy handling even at low temperatures
• Lightweight
• Porous mesh allows water flow for cathodic protection and testing
• Inert and environmentally stable
• High impact strength and tensile strength
• Cost effective protection for pipeline coatings
• Available in rolls or pads

• Low cost, easy to use, lightweight and portable
• Uses a spray manifold/static mixer assembly
• Dispensing is accomplished with an economical modified air gun that provides controlled dispensing
• Added control of air flow volume and pressure allows for optimal material mixing and atomization

• Excellent adhesion (compliments FBE coated pipe)
• Fast cure
• High build (up to 70 mils / 1778 microns in one coat)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Does not shield cathodic protection
• Meets AWWA C-210-92 Standard
• Outstanding self-leveling characteristics
• CSA Z245.30 compliant

Right angle mixing tip for the Protal Air Cartridge Gun (1000 ml)v for Protal 7200 and 7900HT to provide uniform mixing of the Part A & B epoxies.

Straight mixing tip for the Protal Air Cartridge Gun (1000 ml)v for Protal 7200 and 7900HT to provide uniform mixing of the Part A & B epoxies.

• Cold temperature application down to -4°F (-18°C)
• Will not freeze when applied to substrates below 32°F (0°C)
• Fast cure, fast initial set
• Will cure when submersed in water
• High build (in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Does not shield cathodic protection
• Static Mixing Tips available

• Cold temperature application down to -4°F (-20°C)
• Will not freeze when applied to substrates below 32°F (0°C)
• Fast cure, fast initial set
• Will cure when submersed in water after application
• High build (up to 50 mils / 1270 microns in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Does not shield cathodic protection
• Repair cartridges available (50 ml and 825 ml)

• Fast touch dry and set times
• High temperature resistance up to 203°F (95°C)
• High build (up to 70 mils / 1778 microns in one coat)
• Excellent adhesion (compliments FBE coated pipe)
• High abrasion resistance for drilling applications
• Can be used as an abrasion resistant coating (ARO)
• Safe and environmentally friendly
• Does not shield cathodic protection
• Can be applied with brush, roller or spray
• Available in a variety of packaging options
• Meets AWWA C-210-92 Standard
• Outstanding self-leveling characteristics
• CSA Z245.30 compliant

• 100% solids
• Provides corrosion protection
• Resists wave action
• Designed for underwater and other wet applications
• Can be applied up to 2" (50 mm) in thickness
• Self-priming on most surfaces and over most generic coatings
• Underwater rapid cure characteristics
• VOC free

• Single component
• High build
• Can be applied with brush or roller
• Self-Priming
• VOC compliant
• Will not freeze
• Flexible and will not crack

• Excellent sealing properties
• No VOCs
• Will adhere to metal, PVC, polyethylene and concrete
• Not effected by water, acids and salts
• Easy application
• Inert and environmentally stable
• Minimal surface preparation (SSPC SP 2-3)
• Meets AWWA C217 Standard.
• CSA Z245.30 component

• Excellent sealing properties
• No VOCs
• Will adhere to metal, PVC, polyethylene and concrete
• Not effected by water, acids and salts
• Easy application
• Inert and environmentally stable
• Minimal surface preparation (SSPC SP 2-3)
• Meets AWWA C217 Standard.
• CSA Z245.30 component